Reparar Antminer S9

[Beor]

Hola compañeros

Tengo algun Antminer s9 de hace tiempo con las 3 placas jodidas, lo he desmontado y despues de bañarlas con alcohol isopropilico parece que una ha vuelto a la vida, os dejo el log del kernel por si alguno tiene idea de como recuperar las otras 2.....

Saludos

[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.0-xilinx-ga36f3af-dirty (lzq@ubuntu) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #90 SMP PREEMPT Thu Jun 20 15:01:47 CST 2019
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Xilinx Zynq
[ 0.000000] cma: CMA: reserved 128 MiB at 16800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 126976
[ 0.000000] free_area_init_node: node 0, pgdat c075a640, node_mem_map debd8000
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 126976 pages, LIFO batch:31
[ 0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9344 r8192 d15232 u32768
[ 0.000000] pcpu-alloc: s9344 r8192 d15232 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125984
[ 0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 364252K/507904K available (5094K kernel code, 292K rwdata, 1948K rodata, 209K init, 259K bss, 143652K reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xdf800000 - 0xff000000 ( 504 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06e8cf4 (7044 kB)
[ 0.000000] .init : 0xc06e9000 - 0xc071d480 ( 210 kB)
[ 0.000000] .data : 0xc071e000 - 0xc0767058 ( 293 kB)
[ 0.000000] .bss : 0xc0767064 - 0xc07a7d64 ( 260 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ps7-slcr mapped to df802000
[ 0.000000] zynq_clock_init: clkc starts at df802100
[ 0.000000] Zynq clock init
[ 0.000014] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[ 0.000295] ps7-ttc #0 at df804000, irq=43
[ 0.000598] Console: colour dummy device 80x30
[ 0.000627] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[ 0.040198] pid_max: default: 32768 minimum: 301
[ 0.040408] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.040428] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.042640] CPU: Testing write buffer coherency: ok
[ 0.042962] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.043021] Setting up static identity map for 0x4d3ec0 - 0x4d3f18
[ 0.043240] L310 cache controller enabled
[ 0.043259] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[ 0.120988] CPU1: Booted secondary processor
[ 0.210218] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.210350] Brought up 2 CPUs
[ 0.210369] SMP: Total of 2 processors activated.
[ 0.210377] CPU: All CPU(s) started in SVC mode.
[ 0.211042] devtmpfs: initialized
[ 0.213488] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.214688] regulator-dummy: no parameters
[ 0.221748] NET: Registered protocol family 16
[ 0.224020] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.226296] cpuidle: using governor ladder
[ 0.226309] cpuidle: using governor menu
[ 0.233672] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[ 0.235203] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.235217] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.235326] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[ 0.257851] bio: create slab <bio-0> at 0
[ 0.259225] vgaarb: loaded
[ 0.259916] SCSI subsystem initialized
[ 0.260982] usbcore: registered new interface driver usbfs
[ 0.261588] usbcore: registered new interface driver hub
[ 0.261814] usbcore: registered new device driver usb
[ 0.262334] media: Linux media interface: v0.10
[ 0.262490] Linux video capture interface: v2.00
[ 0.262730] pps_core: LinuxPPS API ver. 1 registered
[ 0.262742] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.262874] PTP clock support registered
[ 0.263227] EDAC MC: Ver: 3.0.0
[ 0.264272] Advanced Linux Sound Architecture Driver Initialized.
[ 0.267011] DMA-API: preallocated 4096 debug entries
[ 0.267023] DMA-API: debugging enabled by kernel config
[ 0.267096] Switched to clocksource arm_global_timer
[ 0.287255] NET: Registered protocol family 2
[ 0.288297] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.288354] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.288439] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.288483] TCP: reno registered
[ 0.288501] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.288530] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.288765] NET: Registered protocol family 1
[ 0.289121] RPC: Registered named UNIX socket transport module.
[ 0.289134] RPC: Registered udp transport module.
[ 0.289142] RPC: Registered tcp transport module.
[ 0.289150] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.289162] PCI: CLS 0 bytes, default 64
[ 0.289603] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.291614] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.293710] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.293904] msgmni has been set to 967
[ 0.294673] io scheduler noop registered
[ 0.294686] io scheduler deadline registered
[ 0.294727] io scheduler cfq registered (default)
[ 0.303563] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[ 0.303583] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.428313] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[ 0.996001] console [ttyPS0] enabled
[ 1.000248] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[ 1.007907] [drm] Initialized drm 1.1.0 20060810
[ 1.024924] brd: module loaded
[ 1.034314] loop: module loaded
[ 1.043725] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.049550] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.057348] libphy: XEMACPS mii bus: probed
[ 1.061720] ------------- phy_id = 0x3625e62
[ 1.066434] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[ 1.075097] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.081751] ehci-pci: EHCI PCI platform driver
[ 1.089213] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[ 1.096032] usbcore: registered new interface driver usb-storage
[ 1.102908] mousedev: PS/2 mouse device common for all mice
[ 1.109019] i2c /dev entries driver
[ 1.115913] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[ 1.121440] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 1.127344] Xilinx Zynq CpuIdle Driver started
[ 1.132179] sdhci: Secure Digital Host Controller Interface driver
[ 1.138326] sdhci: Copyright(c) Pierre Ossman
[ 1.142616] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.149491] mmc0: no vqmmc regulator found
[ 1.153504] mmc0: no vmmc regulator found
[ 1.197114] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[ 1.205801] usbcore: registered new interface driver usbhid
[ 1.211311] usbhid: USB HID core driver
[ 1.216015] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.222313] nand: Micron MT29F2G08ABAEAWP
[ 1.226278] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 1.232212] Bad block table found at page 131008, version 0x01
[ 1.238437] Bad block table found at page 130944, version 0x01
[ 1.244488] 3 ofpart partitions found on MTD device pl353-nand
[ 1.250268] Creating 3 MTD partitions on "pl353-nand":
[ 1.255360] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[ 1.263421] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[ 1.270744] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[ 1.279468] nf_conntrack version 0.5.0 (7739 buckets, 30956 max)
[ 1.285986] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.291310] TCP: cubic registered
[ 1.294546] NET: Registered protocol family 17
[ 1.299284] Registering SWP/SWPB emulation handler
[ 1.305172] regulator-dummy: disabling

[Beor]

Segunda parte del codigo

main.c:8570: DETECT HW version=0000c51e
main.c:14064: miner ID : 800cec012c00885c
main.c:14089: Miner Type = S9
main.c:14101: AsicType = 1387
main.c:14104: real AsicNum = 63
main.c:14197: use critical mode to search freq...
driver-bitmain.c:1876: get PLUG ON=0x000000e0
driver-bitmain.c:1946: Find hashboard on Chain[5]
driver-bitmain.c:1946: Find hashboard on Chain[6]
driver-bitmain.c:1946: Find hashboard on Chain[7]
main.c:2282: Check chain[5] PIC fw version=0x03
main.c:2282: Check chain[6] PIC fw version=0x03
main.c:2282: Check chain[7] PIC fw version=0x03
main.c:8940: read pic freq and badcore num...
main.c:8961: chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9099: chain[5] has freq in PIC and will jump over...
main.c:9103: Chain[5] has core num in PIC
main.c:9113: Chain[5] ASIC[0] has core num=1
main.c:9113: Chain[5] ASIC[1] has core num=1
main.c:9113: Chain[5] ASIC[2] has core num=1
main.c:9113: Chain[5] ASIC[3] has core num=1
main.c:9113: Chain[5] ASIC[4] has core num=1
main.c:9113: Chain[5] ASIC[5] has core num=1
main.c:9113: Chain[5] ASIC[6] has core num=1
main.c:9113: Chain[5] ASIC[7] has core num=1
main.c:9113: Chain[5] ASIC[8] has core num=1
main.c:9113: Chain[5] ASIC[9] has core num=1
main.c:9113: Chain[5] ASIC[10] has core num=9
main.c:9113: Chain[5] ASIC[11] has core num=1
main.c:9113: Chain[5] ASIC[12] has core num=1
main.c:9113: Chain[5] ASIC[13] has core num=1
main.c:9113: Chain[5] ASIC[14] has core num=1
main.c:9113: Chain[5] ASIC[15] has core num=1
main.c:9113: Chain[5] ASIC[16] has core num=1
main.c:9113: Chain[5] ASIC[17] has core num=2
main.c:9113: Chain[5] ASIC[19] has core num=1
main.c:9113: Chain[5] ASIC[20] has core num=1
main.c:9113: Chain[5] ASIC[21] has core num=1
main.c:9113: Chain[5] ASIC[22] has core num=1
main.c:9113: Chain[5] ASIC[23] has core num=1
main.c:9113: Chain[5] ASIC[24] has core num=1
main.c:9113: Chain[5] ASIC[25] has core num=1
main.c:9113: Chain[5] ASIC[26] has core num=2
main.c:9113: Chain[5] ASIC[27] has core num=2
main.c:9113: Chain[5] ASIC[28] has core num=1
main.c:9113: Chain[5] ASIC[29] has core num=1
main.c:9113: Chain[5] ASIC[30] has core num=1
main.c:9113: Chain[5] ASIC[31] has core num=1
main.c:9113: Chain[5] ASIC[32] has core num=1
main.c:9113: Chain[5] ASIC[33] has core num=1
main.c:9113: Chain[5] ASIC[34] has core num=1
main.c:9113: Chain[5] ASIC[35] has core num=1
main.c:9113: Chain[5] ASIC[36] has core num=1
main.c:9113: Chain[5] ASIC[37] has core num=3
main.c:9113: Chain[5] ASIC[38] has core num=1
main.c:9113: Chain[5] ASIC[39] has core num=1
main.c:9113: Chain[5] ASIC[40] has core num=1
main.c:9113: Chain[5] ASIC[41] has core num=1
main.c:9113: Chain[5] ASIC[42] has core num=1
main.c:9113: Chain[5] ASIC[43] has core num=1
main.c:9113: Chain[5] ASIC[44] has core num=2
main.c:9113: Chain[5] ASIC[45] has core num=2
main.c:9113: Chain[5] ASIC[46] has core num=1
main.c:9113: Chain[5] ASIC[47] has core num=1
main.c:9113: Chain[5] ASIC[48] has core num=1
main.c:9113: Chain[5] ASIC[50] has core num=2
main.c:9113: Chain[5] ASIC[51] has core num=1
main.c:9113: Chain[5] ASIC[52] has core num=1
main.c:9113: Chain[5] ASIC[53] has core num=2
main.c:9113: Chain[5] ASIC[54] has core num=1
main.c:9113: Chain[5] ASIC[55] has core num=1
main.c:9113: Chain[5] ASIC[56] has core num=1
main.c:9113: Chain[5] ASIC[57] has core num=1
main.c:9113: Chain[5] ASIC[58] has core num=4
main.c:9113: Chain[5] ASIC[59] has core num=1
main.c:9113: Chain[5] ASIC[60] has core num=1
main.c:9113: Chain[5] ASIC[61] has core num=1
main.c:9113: Chain[5] ASIC[62] has core num=1
main.c:2282: Check chain[5] PIC fw version=0x03
main.c:8940: read pic freq and badcore num...
main.c:8961: chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9099: chain[6] has freq in PIC and will jump over...
main.c:9103: Chain[6] has core num in PIC
main.c:9113: Chain[6] ASIC[9] has core num=2
main.c:9113: Chain[6] ASIC[25] has core num=1
main.c:9113: Chain[6] ASIC[29] has core num=15
main.c:9113: Chain[6] ASIC[52] has core num=5
main.c:9113: Chain[6] ASIC[61] has core num=1
main.c:2282: Check chain[6] PIC fw version=0x03
main.c:8940: read pic freq and badcore num...
main.c:8961: chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9099: chain[7] has freq in PIC and will jump over...
main.c:9103: Chain[7] has core num in PIC
main.c:9113: Chain[7] ASIC[12] has core num=15
main.c:9113: Chain[7] ASIC[43] has core num=15
main.c:9113: Chain[7] ASIC[50] has core num=15
main.c:9113: Chain[7] ASIC[58] has core num=2
main.c:2282: Check chain[7] PIC fw version=0x03
main.c:9183: get PIC voltage=57 on chain[5], value=910
main.c:9183: get PIC voltage=57 on chain[6], value=910
main.c:9183: get PIC voltage=57 on chain[7], value=910
main.c:9349: chain[5] temp offset record: 62,0,0,0,0,0,35,28
main.c:9366: chain[5] temp chip I2C addr=0x98
main.c:9372: chain[5] has no middle temp, use special fix mode.
main.c:9349: chain[6] temp offset record: 62,0,0,0,0,0,35,28
main.c:9366: chain[6] temp chip I2C addr=0x98
main.c:9372: chain[6] has no middle temp, use special fix mode.
main.c:9349: chain[7] temp offset record: 62,0,0,0,0,0,35,28
main.c:9366: chain[7] temp chip I2C addr=0x98
main.c:9372: chain[7] has no middle temp, use special fix mode.
main.c:13956: total_exist_chain_num = 3
main.c:9562: CRC error counter=0
main.c:9577: set command mode to VIL
main.c:9649:
--- check asic number
main.c:9745: After Get ASIC NUM CRC error counter=0
main.c:9768: set_baud=0
main.c:10693: The min freq=700
main.c:10695: set real timeout 52, need sleep=379392
main.c:12825: After TEST CRC error counter=0
main.c:14236: search freq for 1 times, completed chain = 3, total chain num = 3
board_frq_tuning.c:628: single_board_frq_tuning enter
board_frq_tuning.c:629: min_rate, des_rate, fix_volt:13800, 14000, 880
board_frq_tuning.c:254: force_freq not set, don't need tuning
main.c:14645: restart Miner chance num=2
main.c:14685: waiting for receive_func to exit!
main.c:14699: waiting for pic heart to exit!
main.c:13927: bmminer not found= 6158 root 0:00 grep bmminer

[Beor]

Tercera parte....

main.c:14758: bmminer not found, restart bmminer ...
driver-btm-c5.c:12285:bitmain_c5_init: This is user mode for mining
driver-btm-c5.c:12334:bitmain_c5_init: Detect 512MB control board of XILINX
driver-btm-c5.c:12355:bitmain_c5_init: Miner Type = S9
driver-btm-c5.c:12366:bitmain_c5_init: Miner compile time: Tue Jul 30 20:37:39 CST 2019 type: Antminer S9
driver-btm-c5.c:12456:bitmain_c5_init: miner ID : 800cec012c00885c
driver-btm-c5.c:12613:bitmain_c5_init: Checking fans...
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5760
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5760
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5760
driver-btm-c5.c:13148:bitmain_c5_init: chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
driver-btm-c5.c:13162:bitmain_c5_init: last_freq: 0x00 0x7d 0x00 0x48 0x00 0x48 0x04 0x48 0x08 0x48 0x00 0x48 0x03 0x48 0x03 0x48 0x03 0x48 0x03 0x48 0x03 0x48 0x03 0x48 0x01 0x48 0x01 0x48 0x0f 0x48 0x0f 0x48 0x0f 0x48 0x0f 0x48 0x05 0x48 0x09 0x48 0x23 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48
driver-btm-c5.c:13189:bitmain_c5_init: Detect: use voltage limit rules on single board!
driver-btm-c5.c:13195:bitmain_c5_init: Detect: S9_63 use voltage level=1 : 1
driver-btm-c5.c:13211:bitmain_c5_init: Chain[J6] has backup chain_voltage=890
driver-btm-c5.c:13228:bitmain_c5_init: No scan based on domain
driver-btm-c5.c:1883:jump_to_app_CheckAndRestorePIC: Check chain[5] PIC fw version=0x03
driver-btm-c5.c:13148:bitmain_c5_init: chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
driver-btm-c5.c:13162:bitmain_c5_init: last_freq: 0x00 0x7d 0x00 0x4c 0x00 0x4c 0x04 0x4c 0x0c 0x4c 0x00 0x4c 0x03 0x4c 0x03 0x4c 0x03 0x4c 0x03 0x4c 0x03 0x4c 0x03 0x4c 0x01 0x4c 0x01 0x4c 0x0f 0x4c 0x0f 0x4c 0x0f 0x4c 0x0f 0x4c 0x05 0x4c 0x07 0x4c 0x23 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c

[Beor]

Cuarta parte...

driver-btm-c5.c:13189:bitmain_c5_init: Detect: use voltage limit rules on single board!
driver-btm-c5.c:13195:bitmain_c5_init: Detect: S9_63 use voltage level=1 : 1
driver-btm-c5.c:13211:bitmain_c5_init: Chain[J7] has backup chain_voltage=870
driver-btm-c5.c:13228:bitmain_c5_init: No scan based on domain
driver-btm-c5.c:1883:jump_to_app_CheckAndRestorePIC: Check chain[6] PIC fw version=0x03
driver-btm-c5.c:13148:bitmain_c5_init: chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
driver-btm-c5.c:13162:bitmain_c5_init: last_freq: 0x00 0x7d 0x00 0x50 0x00 0x50 0x05 0x50 0x00 0x50 0x00 0x50 0x03 0x50 0x03 0x50 0x03 0x50 0x03 0x50 0x03 0x50 0x03 0x50 0x01 0x50 0x01 0x50 0x0f 0x50 0x0f 0x50 0x0f 0x50 0x0f 0x50 0x05 0x50 0x07 0x50 0x23 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50
driver-btm-c5.c:13189:bitmain_c5_init: Detect: use voltage limit rules on single board!
driver-btm-c5.c:13195:bitmain_c5_init: Detect: S9_63 use voltage level=1 : 1
driver-btm-c5.c:13211:bitmain_c5_init: Chain[J8] has backup chain_voltage=870
driver-btm-c5.c:13228:bitmain_c5_init: No scan based on domain
driver-btm-c5.c:1883:jump_to_app_CheckAndRestorePIC: Check chain[7] PIC fw version=0x03
driver-btm-c5.c:12237:init_exist_chain_table: total_exist_chain_num = 3
driver-btm-c5.c:13361:bitmain_c5_init: Chain[J6] orignal chain_voltage_pic=57 value=910
driver-btm-c5.c:13362:bitmain_c5_init: Chain[J6] original chain_voltage_value=890 adjusted chain_voltage_value:890, value=910
driver-btm-c5.c:13379:bitmain_c5_init: Chain[J6] will use backup chain_voltage_pic=890 [91]
driver-btm-c5.c:13389:bitmain_c5_init: Chain[J6] get working chain_voltage_pic=91
driver-btm-c5.c:13361:bitmain_c5_init: Chain[J7] orignal chain_voltage_pic=57 value=910
driver-btm-c5.c:13362:bitmain_c5_init: Chain[J7] original chain_voltage_value=870 adjusted chain_voltage_value:870, value=910
driver-btm-c5.c:13379:bitmain_c5_init: Chain[J7] will use backup chain_voltage_pic=870 [125]
driver-btm-c5.c:13389:bitmain_c5_init: Chain[J7] get working chain_voltage_pic=125
driver-btm-c5.c:13361:bitmain_c5_init: Chain[J8] orignal chain_voltage_pic=57 value=910
driver-btm-c5.c:13362:bitmain_c5_init: Chain[J8] original chain_voltage_value=870 adjusted chain_voltage_value:870, value=910
driver-btm-c5.c:13379:bitmain_c5_init: Chain[J8] will use backup chain_voltage_pic=870 [125]
driver-btm-c5.c:13389:bitmain_c5_init: Chain[J8] get working chain_voltage_pic=125
driver-btm-c5.c:13494:bitmain_c5_init: Chain[J6] has 63 asic
driver-btm-c5.c:13494:bitmain_c5_init: Chain[J7] has 0 asic
driver-btm-c5.c:13522:bitmain_c5_init: retry Chain[J7] has 0 asic
driver-btm-c5.c:13522:bitmain_c5_init: retry Chain[J7] has 0 asic
driver-btm-c5.c:13522:bitmain_c5_init: retry Chain[J7] has 0 asic
driver-btm-c5.c:13522:bitmain_c5_init: retry Chain[J7] has 0 asic
driver-btm-c5.c:13522:bitmain_c5_init: retry Chain[J7] has 0 asic
driver-btm-c5.c:13522:bitmain_c5_init: retry Chain[J7] has 0 asic
driver-btm-c5.c:13494:bitmain_c5_init: Chain[J8] has 0 asic
driver-btm-c5.c:13522:bitmain_c5_init: retry Chain[J8] has 0 asic
driver-btm-c5.c:13522:bitmain_c5_init: retry Chain[J8] has 0 asic
driver-btm-c5.c:13522:bitmain_c5_init: retry Chain[J8] has 0 asic
driver-btm-c5.c:13522:bitmain_c5_init: retry Chain[J8] has 0 asic
driver-btm-c5.c:13522:bitmain_c5_init: retry Chain[J8] has 0 asic
driver-btm-c5.c:13522:bitmain_c5_init: retry Chain[J8] has 0 asic
driver-btm-c5.c:4543:set_frequency: Chain[J6] has core num in PIC
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[0] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[1] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[2] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[3] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[4] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[5] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[6] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[7] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[8] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[9] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[10] has core num=9
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[11] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[12] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[13] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[14] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[15] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[16] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[17] has core num=2
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[19] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[20] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[21] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[22] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[23] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[24] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[25] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[26] has core num=2
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[27] has core num=2
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[28] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[29] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[30] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[31] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[32] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[33] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[34] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[35] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[36] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[37] has core num=3
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[38] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[39] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[40] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[41] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[42] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[43] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[44] has core num=2
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[45] has core num=2
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[46] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[47] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[48] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[50] has core num=2
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[51] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[52] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[53] has core num=2
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[54] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[55] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[56] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[57] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[58] has core num=4
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[59] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[60] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[61] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[62] has core num=1
driver-btm-c5.c:4583:set_frequency: miner total rate=4523GH/s ideal_total_hash_rate = 4500GH/s
driver-btm-c5.c:4608:set_frequency: read PIC voltage=910 on chain[5]
driver-btm-c5.c:4610:set_frequency: Chain:5 chipnum=63
driver-btm-c5.c:4630:set_frequency: Chain[J6] voltage added=0.0V
driver-btm-c5.c:4780:set_frequency: Chain:5 temp offset=0
driver-btm-c5.c:4785:set_frequency: Chain:5 base freq=637

[Beor]

Quinta parte....

Asic[ 0]:637 Asic[ 1]:637 Asic[ 2]:637 Asic[ 3]:637 Asic[ 4]:637 Asic[ 5]:637 Asic[ 6]:637 Asic[ 7]:637
Asic[ 8]:637 Asic[ 9]:637 Asic[10]:637 Asic[11]:637 Asic[12]:637 Asic[13]:637 Asic[14]:637 Asic[15]:637
Asic[16]:637 Asic[17]:637 Asic[18]:637 Asic[19]:637 Asic[20]:637 Asic[21]:637 Asic[22]:637 Asic[23]:637
Asic[24]:637 Asic[25]:637 Asic[26]:637 Asic[27]:637 Asic[28]:637 Asic[29]:637 Asic[30]:637 Asic[31]:637
Asic[32]:637 Asic[33]:637 Asic[34]:637 Asic[35]:637 Asic[36]:637 Asic[37]:637 Asic[38]:637 Asic[39]:637
Asic[40]:637 Asic[41]:637 Asic[42]:637 Asic[43]:637 Asic[44]:637 Asic[45]:637 Asic[46]:637 Asic[47]:637
Asic[48]:637 Asic[49]:637 Asic[50]:637 Asic[51]:637 Asic[52]:637 Asic[53]:637 Asic[54]:637 Asic[55]:637
Asic[56]:637 Asic[57]:637 Asic[58]:637 Asic[59]:637 Asic[60]:637 Asic[61]:637 Asic[62]:637
driver-btm-c5.c:4821:set_frequency: Chain:5 max freq=637
driver-btm-c5.c:4822:set_frequency: Chain:5 min freq=637

driver-btm-c5.c:4831:set_frequency: Miner fix freq ...
driver-btm-c5.c:4866:set_frequency: read PIC voltage=910 on chain[5]
driver-btm-c5.c:4867:set_frequency: Chain:5 chipnum=63
driver-btm-c5.c:4886:set_frequency: Chain[J6] voltage added=0.0V
driver-btm-c5.c:5070:set_frequency: Chain:5 temp offset=0
driver-btm-c5.c:5075:set_frequency: Chain:5 base freq=637
Asic[ 0]:637 Asic[ 1]:637 Asic[ 2]:637 Asic[ 3]:637 Asic[ 4]:637 Asic[ 5]:637 Asic[ 6]:637 Asic[ 7]:637
Asic[ 8]:637 Asic[ 9]:637 Asic[10]:637 Asic[11]:637 Asic[12]:637 Asic[13]:637 Asic[14]:637 Asic[15]:637
Asic[16]:637 Asic[17]:637 Asic[18]:637 Asic[19]:637 Asic[20]:637 Asic[21]:637 Asic[22]:637 Asic[23]:637
Asic[24]:637 Asic[25]:637 Asic[26]:637 Asic[27]:637 Asic[28]:637 Asic[29]:637 Asic[30]:637 Asic[31]:637
Asic[32]:637 Asic[33]:637 Asic[34]:637 Asic[35]:637 Asic[36]:637 Asic[37]:637 Asic[38]:637 Asic[39]:637
Asic[40]:637 Asic[41]:637 Asic[42]:637 Asic[43]:637 Asic[44]:637 Asic[45]:637 Asic[46]:637 Asic[47]:637
Asic[48]:637 Asic[49]:637 Asic[50]:637 Asic[51]:637 Asic[52]:637 Asic[53]:637 Asic[54]:637 Asic[55]:637
Asic[56]:637 Asic[57]:637 Asic[58]:637 Asic[59]:637 Asic[60]:637 Asic[61]:637 Asic[62]:637
driver-btm-c5.c:5122:set_frequency: Chain:5 max freq=637
driver-btm-c5.c:5123:set_frequency: Chain:5 min freq=637

driver-btm-c5.c:5131:set_frequency: max freq = 637
driver-btm-c5.c:4149:ProcessFixFreq: totalRate = 4523, fixed_totalRate = 4500
driver-btm-c5.c:9614:init_uart_baud: set baud=1
driver-btm-c5.c:6605:calibration_sensor_offset: Chain[J6] PIC temp offset: 62,0,0,0,0,0,35,28,0,0,0,0,0,0,0,0,0,0,
driver-btm-c5.c:6639:calibration_sensor_offset: chain[6] temp chip I2C addr=0x98
driver-btm-c5.c:6647:calibration_sensor_offset: chain[6] has no middle temp, use special fix mode.
driver-btm-c5.c:6672:calibration_sensor_offset: Chain[J6] chip[244] use PIC middle temp offset=0 typeID=55
driver-btm-c5.c:6396:do_calibration_sensor_offset: New offset Chain[6] chip[244] local:26 remote:29 offset:27
driver-btm-c5.c:6765:calibration_sensor_offset: Chain[J6] chip[244] get middle temp offset=27 typeID=55
driver-btm-c5.c:12129:set_working_voltage: setting to working voltage...
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 900
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 890
driver-btm-c5.c:14027:bitmain_c5_init: start thread for read temp
setStartTimePoint total_tv_start_sys=356 total_tv_end_sys=357
driver-btm-c5.c:10330:check_system_work: restartNum = 2 , auto-reinit enabled...
util.c:3207:initiate_stratum: mining.subscribe:{"id": 0, "method": "mining.subscribe", "params": ["bmminer/2.0.0/Antminer S9/13500"]}
util.c:3207:initiate_stratum: mining.subscribe:{"id": 1, "method": "mining.subscribe", "params": ["bmminer/2.0.0/Antminer S9/13500"]}
util.c:3207:initiate_stratum: mining.subscribe:{"id": 2, "method": "mining.subscribe", "params": ["bmminer/2.0.0/Antminer S9/13500"]}
driver-btm-c5.c:8738:read_temp_func: bring_up_pcb_temp = 34
driver-btm-c5.c:12129:set_working_voltage: setting to working voltage...
driver-btm-c5.c:10521:check_system_work: voltage_check_done
driver-btm-c5.c:9897:if_avg_hash_ok: avg hash rate = 4700.410283, ideal hash rate = 4500
driver-btm-c5.c:10415:check_system_work: hash rate is ok now
do read_temp_func once...

get RT hashrate from Chain[5]: (asic index start from 1-63)
Asic[01]=68.0650 Asic[02]=72.6280 Asic[03]=79.4900 Asic[04]=71.7390 Asic[05]=71.2360 Asic[06]=72.5780 Asic[07]=69.8090 Asic[08]=70.2960
Asic[09]=73.3660 Asic[10]=72.8130 Asic[11]=69.4240 Asic[12]=68.7530 Asic[13]=75.1950 Asic[14]=72.9970 Asic[15]=73.0140 Asic[16]=74.4740
Asic[17]=72.0740 Asic[18]=74.3730 Asic[19]=71.5880 Asic[20]=75.3120 Asic[21]=73.1310 Asic[22]=68.0140 Asic[23]=65.6490 Asic[24]=76.2020
Asic[25]=73.9870 Asic[26]=75.8160 Asic[27]=70.7320 Asic[28]=71.9400 Asic[29]=74.6080 Asic[30]=68.1820 Asic[31]=68.2320 Asic[32]=72.8630
Asic[33]=70.2460 Asic[34]=72.5110 Asic[35]=67.9810 Asic[36]=71.3530 Asic[37]=73.5510 Asic[38]=68.0140 Asic[39]=70.7150 Asic[40]=66.1860
Asic[41]=71.2360 Asic[42]=67.7460 Asic[43]=76.3020 Asic[44]=75.7650 Asic[45]=72.8800 Asic[46]=66.0010 Asic[47]=79.7420 Asic[48]=71.7560
Asic[49]=73.0140 Asic[50]=64.5250 Asic[51]=69.0880 Asic[52]=70.3300 Asic[53]=71.5540 Asic[54]=74.2050 Asic[55]=71.6380 Asic[56]=74.9430
Asic[57]=71.5210 Asic[58]=78.6010 Asic[59]=75.1450 Asic[60]=71.7560 Asic[61]=73.9200 Asic[62]=70.1110 Asic[63]=73.9700
Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Done check_asic_reg
Chain[5] Chip[244] pcb temperature=60
Chain[5] Chip[62] junction temperature=68
Special fix Chain[5] Chip[62] middle Temp = 75
Done read temp on Chain[5]
Max pcb temp : 60
set FAN speed according to: temp_highest=60 temp_top1[PWM_T]=60 temp_top1[TEMP_POS_LOCAL]=60 temp_change=0 fix_fan_steps=0
FAN PWM: 70
read_temp_func Done!
CRC error counter=1